Maximize plant performance and confirm net metering bills by automatically calculating the amount of consumed grid power using the Solar-Log 10 Meter. This bidirectional power meter connects to Solar-Log® data loggers via RS485 and allows plant owners to monitor total building-load by measuring power inside the main distribution panel at the utility connection. The meter includes 2 current transformers for measuring the current and phase voltage.
The Solar-Log 10 with 2 split core current transformers are an integral part of the Solar-Log 360 & GE Meter assembly for PV production and consumption monitoring.
The Solar-Log 10 Meter connects to Solar-Log® Data Logger or the Solar-Log 370 via RS485. The included
200A CTs connect inside the main distribution panel at the utility connection
| Technical data | Solar-Log 10 |
|---|---|
Input Voltage Configuration | Single (split) Phase |
| Main Voltage Input | 100-240 VAC, -15% / +10% |
| Input Power | <1.2 Watt |
| Current Sensor Rating* | Up to 200A |
| Power Factor | 0.0 - 1.0 CosPhi |
| Accuracy | <1% with calibrated CTs |
| Line Frequency | 50 - 60 Hz |
| Voltage Operating Rate | +/- 10 % Of Rated Load |
| Temperature Range | -40F to 140F |
| Altitude | 2000 Meters Maximum |
| Voltage Overload | 10% |
| Current Sensor Overload | 10%; 100% for 1 minute |
| Installation (Surge Category) | CAT III |
| Measurement Category | CAT III |
| Enclosure Material | NEMA 4X/6 // IP 66/67: |
| Standards | EN 62208, UL Listed |
| Current Transformers | Single (Split Phase), 120/240 VAC: up to 200 A |
| Current Transformers | (2) Solar-Log® 200 A Split Core Outside Diameter 2 inch x 2 inch x 0.5 inch opening 0.75 inch 10 feet (extension options available) |
| Compatibility | Solar-Log 370, 360 (included), 300, 1200, 2000 |
